Light-Weight Tubular Front K-Member for 1996-2004 Mustang and Cobra

Special Introductory Price

Price: $769.00

SKU: KB-49610

Weight: 29 lb.

Shipping: Calculated at checkout

AGS 3.0 Light-weight Tubular Front K-Member

Strongest, Best Engineered, “Bolt-In” K-Member available on the aftermarket!

Adds 1” to wheel base for incredible balance, steering, grip and braking
Lightweight, strong design takes 40 lbs. off front of car
Increased anti-dive for better braking performance
Stabilizes camber curve in cornering
Reduced roll center migration in cornering
Maximizes tire contact patch to maximize grip
Competition proven - available for street, open track or race

The Advanced Geometry Tubular K-Member optimizes Kenny Brown’s “fixed strut” advanced geometry suspension design for superior handling, grip, and braking with a distinct European sports car performance feel. The Tubular K-member reduces overall weight by 40 pounds over factory and improves weight distribution and balance by extending the wheelbase forward by one inch improving the roll center envelope, camber gain, toe curve greatly improving the handling performance. Designed to be used in conjunction with the Kenny Brown Tubular Front Lower Control Arms and coil-over shock package.

KB-49610 Fits 1996-2004 Mustang and Cobra with 4.6L engines

KB-49615 Fits 1994-2004 Mustang and Cobra with 5.0L OHV engines.

Notes: 1999-2004 4.6L Cobras need oil filter relocation kit - Requires coil-over strut/spring package - May require modifications for proper fitment on 1979-1995 model cars

The key to the Advanced Geometry Coil-Over Front Suspension System is the Light-Weight Tubular K-Member, which rectifies many of the inherent Mustang shortcomings in one package. First, the whole module is about 40% lighter than OEM, which takes weight off the nose for improved front to rear balance. It stretches the wheelbase forward one inch (just enough so fender mods are not required), which shifts ½ percentage point of weight bias to the rear. The unique geometry addresses roll-center migration, anti-dive, bump-steer and camber gains with most of the camber gain dialed into steer rather than bump helping maintain a bigger contact patch under hard braking.

Tech Tips:

Must relocate Oil Filter on Mustang ’99-’04 Cobras with 4.6L DOHC Engine.
May require Oil Filter Relocation on some, but not all ’99-’04 Mustang GT models.
Will require front-end alignment after installation. See Insert included with installation instructions for Kenny’s recommended alignment specs.
Designed to work only with Kenny Brown Tubular Front Lower Control Arms.
1979-1993 may require modification of front inner fender skirting.
1986-1993 Mustangs may require minor modification where the K-Member mounts to the Subframe at the top of the K-Member. Please refer to illustrations for more information.

WARRANTY

Kenny Brown Performance addresses potential warranty issues in the engineering process by using only the highest grad components available and engineering them to reduce the potential for failures and warranty issues. All Kenny Brown components are thoroughly inspected, tested, and approved prior to release to the customer. As with any mechanical creature, occasionally warranty issues arise. If you experience a warranty or fitment issue, please contact Kenny Brown Performance customer service at 855.847.4477. Any shipping charges that are incurred due to the result of a warranty issue is the responsibility of the customer, not Kenny Brown Performance.

Kenny Brown Performance is not responsible for any loss, damage or injury resulting from direct or indirect use of our products or other manufacturers’ products, or the inability of purchaser to determine proper use, application or installation of our product.

Other Manufacturer’s Products

Kenny Brown strives to use only the best available components in the conversion process. These brand name components carry warranties from their respective manufacturers with the warranty by the manufacturer extended to the purchaser. We will be happy to assist in obtained fulfillment of a manufacturer’s warranty. Other than applicable manufacturer’s warranties, there are no warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose. The entire risk as to the quality and performance of such parts is with the buyer.

Kenny Brown Performance Manufactured Products

In an effort to maintain the high level of customer service Kenny Brown products are known for, Kenny Brown offers a limited warranty. Due to the use of and nature of high performance vehicles, all warranty issues are evaluated on an individual basis. Kenny Brown Performance, at its sole discretion, will determine the validity of each warranty. Kenny Brown will do its utmost to ensure satisfaction to its customers and assist in seeking resolutions in such matters. Kenny Brown Performance has no control over the use, misuse, neglect, abuse or incorrect installation and servicing of said components, parts or vehicles. Other than the above stated warranty, there are no warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are excluded. The entire risk as to the quality and performance of such parts is with the buyer.

Competition Products

Competition parts are sold “as is” without any warranty whatsoever. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are excluded. The entire risk as to the quality and performance of such parts is with the buyer. Should such parts prove defective following their purchase, the buyer and not the manufacturer, distributor or retailer, assumes the entire cost of all necessary servicing or repair.

Kenny Brown Performance warranty on its cars and parts, along with Car Manufacturers’ warranty on its vehicles, is voided if the vehicle or parts are used for competition or if they fail as a result of modification. Installation of some components may affect car manufacturers’ warranty and Kenny Brown Performance warranty.

TECHNICAL ASSISTANCE

Kenny Brown Performance has a philosophy of offering top quality customer service before, during and after the sale. Our technical assistance is available during regular business hours to answer questions on Kenny Brown products and assist with installation questions. Feel free to contact our Technical Assistance department at 855.847.4477.

PRICING

All prices, descriptions, specifications, and part numbers are subject to change without notice. Notification of price increases will be given prior to shipment.

TERMS

Kenny Brown Performance requires all purchases to be paid for before shipment or delivery. For your convenience we accept Visa, Mastercard, American Express, and Discover credit cards, along with debit cards, cashers checks and money orders. It is our policy to charge your credit card the day the item is shipped unless it is a special order product and you will be informed at the time of sale.

RETURNS

If you need to return or exchange an item, please call Kenny Brown Performance customer service department at 855.847.4477 for a Return Goods Authorization (RGA) Number. We accept returns within 30 days of delivery. All merchandise must be new and in resaleable condition, and must be issued an RGA number. The RGA number must be clearly marked on the outside of the package and the product must be returned freight prepaid. Special Order, discontinued, or non-stock items are not returnable.

RETURN FOR REFUND

Credit amount will be calculated as follows: Credit less 15% restocking fee and less all freight charges incurred. Returns missing pieces or hardware will be charged accordingly. Credits will be issued to the credit card used on the order. If payment received was cash or check, we will refund by check to the billing address. The merchandise should be completely repackaged in the original packing material for the return inspection. All original packaging material must be returned along with the merchandise. Your credit depends upon these steps being followed carefully.

SHIPPING AND DAMAGE CLAIMS

Please inspect your shipment immediately upon receipt. If your shipment has arrived damaged, please contact the shipping company directly within five working days. All shipments are F.O.B. Wauconda, IL. If your shipment has been shorted, contact Kenny Brown Performance customer service department at 855.847.4477 within five working days.

COMPLIANCE WITH STATE LAWS

Because some U.S., Canadian, State or provincial laws and regulations may prohibit removal or modifications of components that were installed on OE Manufacturers’ vehicles to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, Kenny Brown Performance recommends that vehicles equipped with parts designated “for off-highway use” not be operated on public roads, and offers such parts only for track or off-highway competitive or performance use and does not guarantee compliance with these state laws and regulations. In California, these parts may legally be used only on a racing vehicle which will never be operated on public roads. In addition, installation of this part may adversely affect the warranty coverage of your vehicle.